Carlos Bispo
Faculty
This author has not yet filled in any details.
Closed Projects
| Acronym | Name | Funding | Dates |
|---|---|---|---|
| DisNet | Distributed Scheduling for Networks | FCT | 2001|2002 |
| DecPUCS | Decentralized Planning Under Uncertainty for Cooperative Systems | FCT | 2007-10|2010-09 |
Journal Papers
[1] Carlos Bispo, The single-server scheduling problem with convex costs, Queuing Systems, Vol. 73, Issue 3, pp. 261-294. DOI 10.1007/s11134-012-9316-8, 2013
[2] P. A. Afonso, Carlos Bispo, Railway Traffic Management: Meet and Pass Problem, Journal of System and Management Sciences, Vol. 1, No. 6, December, 2011
[3] Sridhar Tayur, Carlos Bispo, Managing simple re-entrant flow lines: Theoretical foundation and experimental results, IIE Transactions, Vol. 33, No. 8, 2001
[4] Jose A. A. Moreira, Carlos Bispo, An echelon inventory-based single-stage cost function for a two-station tandem system, Production Planning and Control, Vol. 10, No. 7, 643-649, 1999
[5] Luís Custódio, João Sentieiro, Carlos Bispo, A Fuzzy Decision System for Production Planning and Scheduling, IEEE Transactions on Robotics and Automation, Special Issue on Computer Integrated Manufacturing, 1994
[6] Luís Custódio, João Sentieiro, Carlos Bispo, Production Planning and Scheduling using a Fuzzy Decision System, IEEE Transactions on Robotics and Automation, Vol. 10, no. 2, 1994
[7] Carlos Bispo, João Sentieiro, Adaptive Scheduling for High Volume Shops, IEEE Transactions on Robotics and Automation, no. 6, Vol. 8, pp. 696-706, 1992
Book Chapters
[8] João Sequeira, Carlos Bispo, João Sentieiro, Distributed Control of a Flexible Manufacturing Plant using Learning Automata, in Parallel and Distributed Computing in Engineering Systems, G. Tzafestas, P. Borne, L. Grandinetti Eds., pp. 327-332, North-Holland Publishers, Netherlands, 1992
Conference Papers
[9] Carlos Bispo, Stability of re-entrant flow lines, Proc. of OR 2013 - International Conference on Operations Research, Rotterdam, The Netherlands, 2013 - PDF
[10] Carlos Bispo, Active Idleness Scheduler with Simulated Annealing, Proc. of INCOM 2012 - 14th IFAC Symposium on Information Control Problems in Manufacturing, Bucharest, Romania, 2012 - PDF
[11] Carlos Bispo, Single Server Scheduling Problem. Optimal policy for convex costs depends on arrival rates, Proc. of MISTA 2011 - 5th Multidisciplinary International Scheduling Conference, Phoenix, USA, 2011
[12] P. A. Afonso, Carlos Bispo, Railway Traffic Management. The Meet & Pass Problem, Proc. of LISS 2011 - 1st International Conference on Logistics, Informatics and Service Science, Beijing, People's Republic of China, 2011
[13] F. Mendonca, Carlos Bispo, Smooth Priorities for Multi-Product Inventory Control, Proc. of INCOM 2009 - 13th IFAC Symposium on Information Control Problems in Manufacturing, Moscow, Russia, 2009
[14] Carlos Bispo, Zita Fernandes, Marta Rebello, Simulating Activity Networks in JAVA, Proc. of the 6th EUROSIM Congress on Modeling and Simulation, Ljubljana, Slovenia, 2007
[15] Carlos Bispo, Renovacao Tecnologica ou Renovacao na Gestao de Operacoes?, 1º Congresso Nacional da Administracao Publica, Lisbon, Portugal, 2003
[16] Jose A. A. Moreira, Carlos Bispo, Performance Improvement through Active Idleness, Proc. MED2003 - 11th Mediterranean Conference on Control and Automation, Greece, 2003
[17] Jose Moreira, Carlos Bispo, Stability or Stabilizability? Seidmans FCFS example revisited, 10th Mediterranean Conference on Control and Automation, Lisbon, Portugal, 2002
[18] Nuno Orfão, Carlos Bispo, Make-to-Stock vs. Make-to-Order in the Glass Manufacturing Industry, POMS-BRAZIL Conference, Guaruja, Brazil, 2001
[19] Nuno Orfão, Carlos Bispo, An Inventory Decision Support System to the Glass Manufacturing Industry, 12th International Meeting of the Euro Working Group on Decision Support Systems, Cascais, Portugal, 2001
[20] Carlos Bispo, Smooth Priorities for Make-to-Stock Inventory Control, Multi-echelon Inventory Systems Conference, U.C: Berkeley, U.S.A, 2001
[21] J. Moreira, Carlos Bispo, An Echelon Inventory Based Single Stage Cost Function for a Two Station Tandem System, Proceedings of the Rensselaer's International Conference on Agile, Intelligent and Computer Integrated Manufacturing (CAICIM), Troy, NY, 1998
[22] Luís Custódio, Carlos Bispo, João Sentieiro, A Hierarchical Fuzzy Control System for Short-Range Planning and Scheduling, Proceedings of the Rensselaers's Third International Conference on Computer Integrated Manufacturing, Troy, NY, 1992
[23] V. Marques, Carlos Bispo, João Sentieiro, A system for the compactation of two-dimensional irregular shapes based on simulated annealing, Proc. of International Conference on Industrial Electronics, Control and Instrumentation (Cat. No. 91CH2976-9); Kobe, Japan, 1991 - PDF
[24] Luís Custódio, Carlos Bispo, João Sentieiro, Fuzzy Logic Applied to Production Scheduling, Workshop CIM in the Process Industry, Athens, Greece, 1991
[25] L. Carvalho, R. Almeida, Carlos Bispo, João Sentieiro, An Integrated Environment for Planning and Scheduling in Flow-Shop Manufacturing Plants, Proceedings of the 2nd International Conference on Computer Integrated Manufacturing, RPI, Troy, New York, USA, 1990
[26] Carlos Bispo, João Sentieiro, An Extended Horizon Scheduling Algorithm for the Job-Shop Problem, 1st International Conference on Computer Integrated Manufacturing RPI, Troy, New York, 1988
Technical Reports
[27] Ivone Fernandes, Luís Custódio, Carlos Bispo, Metodos “classicos” e multi-agentes num sistema de manufactura, Technical Report Internal Report RT-705-00, 2000
[28] Luís Custódio, João Sentieiro, Carlos Bispo, Fuzzy Logic Applied to Production Planning and Scheduling, AIMS Lab-TR 701-93, 1993
[1] Carlos Bispo, The single-server scheduling problem with convex costs, Queuing Systems, Vol. 73, Issue 3, pp. 261-294. DOI 10.1007/s11134-012-9316-8, 2013
[2] P. A. Afonso, Carlos Bispo, Railway Traffic Management: Meet and Pass Problem, Journal of System and Management Sciences, Vol. 1, No. 6, December, 2011
[3] Sridhar Tayur, Carlos Bispo, Managing simple re-entrant flow lines: Theoretical foundation and experimental results, IIE Transactions, Vol. 33, No. 8, 2001
[4] Jose A. A. Moreira, Carlos Bispo, An echelon inventory-based single-stage cost function for a two-station tandem system, Production Planning and Control, Vol. 10, No. 7, 643-649, 1999
[5] Luís Custódio, João Sentieiro, Carlos Bispo, A Fuzzy Decision System for Production Planning and Scheduling, IEEE Transactions on Robotics and Automation, Special Issue on Computer Integrated Manufacturing, 1994
[6] Luís Custódio, João Sentieiro, Carlos Bispo, Production Planning and Scheduling using a Fuzzy Decision System, IEEE Transactions on Robotics and Automation, Vol. 10, no. 2, 1994
[7] Carlos Bispo, João Sentieiro, Adaptive Scheduling for High Volume Shops, IEEE Transactions on Robotics and Automation, no. 6, Vol. 8, pp. 696-706, 1992
[1] João Sequeira, Carlos Bispo, João Sentieiro, Distributed Control of a Flexible Manufacturing Plant using Learning Automata, in Parallel and Distributed Computing in Engineering Systems, G. Tzafestas, P. Borne, L. Grandinetti Eds., pp. 327-332, North-Holland Publishers, Netherlands, 1992
[1] Carlos Bispo, Stability of re-entrant flow lines, Proc. of OR 2013 - International Conference on Operations Research, Rotterdam, The Netherlands, 2013 - PDF
[2] Carlos Bispo, Active Idleness Scheduler with Simulated Annealing, Proc. of INCOM 2012 - 14th IFAC Symposium on Information Control Problems in Manufacturing, Bucharest, Romania, 2012 - PDF
[3] Carlos Bispo, Single Server Scheduling Problem. Optimal policy for convex costs depends on arrival rates, Proc. of MISTA 2011 - 5th Multidisciplinary International Scheduling Conference, Phoenix, USA, 2011
[4] P. A. Afonso, Carlos Bispo, Railway Traffic Management. The Meet & Pass Problem, Proc. of LISS 2011 - 1st International Conference on Logistics, Informatics and Service Science, Beijing, People's Republic of China, 2011
[5] F. Mendonca, Carlos Bispo, Smooth Priorities for Multi-Product Inventory Control, Proc. of INCOM 2009 - 13th IFAC Symposium on Information Control Problems in Manufacturing, Moscow, Russia, 2009
[6] Carlos Bispo, Zita Fernandes, Marta Rebello, Simulating Activity Networks in JAVA, Proc. of the 6th EUROSIM Congress on Modeling and Simulation, Ljubljana, Slovenia, 2007
[7] Carlos Bispo, Renovacao Tecnologica ou Renovacao na Gestao de Operacoes?, 1º Congresso Nacional da Administracao Publica, Lisbon, Portugal, 2003
[8] Jose A. A. Moreira, Carlos Bispo, Performance Improvement through Active Idleness, Proc. MED2003 - 11th Mediterranean Conference on Control and Automation, Greece, 2003
[9] Jose Moreira, Carlos Bispo, Stability or Stabilizability? Seidmans FCFS example revisited, 10th Mediterranean Conference on Control and Automation, Lisbon, Portugal, 2002
[10] Nuno Orfão, Carlos Bispo, Make-to-Stock vs. Make-to-Order in the Glass Manufacturing Industry, POMS-BRAZIL Conference, Guaruja, Brazil, 2001
[11] Nuno Orfão, Carlos Bispo, An Inventory Decision Support System to the Glass Manufacturing Industry, 12th International Meeting of the Euro Working Group on Decision Support Systems, Cascais, Portugal, 2001
[12] Carlos Bispo, Smooth Priorities for Make-to-Stock Inventory Control, Multi-echelon Inventory Systems Conference, U.C: Berkeley, U.S.A, 2001
[13] J. Moreira, Carlos Bispo, An Echelon Inventory Based Single Stage Cost Function for a Two Station Tandem System, Proceedings of the Rensselaer's International Conference on Agile, Intelligent and Computer Integrated Manufacturing (CAICIM), Troy, NY, 1998
[14] Luís Custódio, Carlos Bispo, João Sentieiro, A Hierarchical Fuzzy Control System for Short-Range Planning and Scheduling, Proceedings of the Rensselaers's Third International Conference on Computer Integrated Manufacturing, Troy, NY, 1992
[15] V. Marques, Carlos Bispo, João Sentieiro, A system for the compactation of two-dimensional irregular shapes based on simulated annealing, Proc. of International Conference on Industrial Electronics, Control and Instrumentation (Cat. No. 91CH2976-9); Kobe, Japan, 1991 - PDF
[16] Luís Custódio, Carlos Bispo, João Sentieiro, Fuzzy Logic Applied to Production Scheduling, Workshop CIM in the Process Industry, Athens, Greece, 1991
[17] L. Carvalho, R. Almeida, Carlos Bispo, João Sentieiro, An Integrated Environment for Planning and Scheduling in Flow-Shop Manufacturing Plants, Proceedings of the 2nd International Conference on Computer Integrated Manufacturing, RPI, Troy, New York, USA, 1990
[18] Carlos Bispo, João Sentieiro, An Extended Horizon Scheduling Algorithm for the Job-Shop Problem, 1st International Conference on Computer Integrated Manufacturing RPI, Troy, New York, 1988
[1] Ivone Fernandes, Luís Custódio, Carlos Bispo, Metodos “classicos” e multi-agentes num sistema de manufactura, Technical Report Internal Report RT-705-00, 2000
[2] Luís Custódio, João Sentieiro, Carlos Bispo, Fuzzy Logic Applied to Production Planning and Scheduling, AIMS Lab-TR 701-93, 1993
In the same group
Carlos Azevedo
Meysam Basiri
Carlos Bispo
Oscar Lima
José Corujeira
Luís Custódio
Monica Ekal
Kagan Erunsal
Isabel Ferreira
João Gonçalves
Pedro Lima
Rute Luz
Lotfi Massarweh
André Mateus
João Pereira
Enrico Piazza
Lakshmi Prasad
Eloy Retamino
Isabel Ribeiro
Tomás Ribeiro
José Rosa
João Sequeira
Porfírio Silva
Tiago Veiga
Rodrigo Ventura
Alicja Wasik